HyperLOG® 4000 LogPer broadband LogPer EMC EMI antenna span 400MHz to 6GHz

EMC precompliance measurement antenna HyperLOG 4000
    HyperLOG 40xx antenna with optional aluminum tripod
Visit the EMV 2010 Expo in Düsseldorf
Visit the Electronica Expo 2010 in Munich
CE tested

REFERENCES / examples of professional users:
  • BOEING, USA
  • Rohde & Schwarz, M?nchen, Germany
  • DaimlerChrysler, Ulm, Germany
  • Department of National Defence and Canadian Forces, Canada
  • EADS (European Aeronautic Defence & Space Company), Belgium
  • Polizeipr?sidium, M?nchen, Germany
  • Los Alamos National Labratory, USA
  • Max-Planck-Institut f?r Polymerforschung, Mainz, Germany
  • Indonesien Institute of Sience, Indonesia
  • Philips Semiconductors, Hamburg, Germany
  • Tele.ring Telecom Service GmbH, Wien, Austria
  • Infineon, Austria

Calibration & standards:
  • DKD ISO calibration certificates available from Aaronia:
    Calibration is performed by comparison with reference standards or reference measurement devices which have been calibrated with the national German calibration service (DKD) and hence are calibrated according to the national reference standards which are used by the federal physical-technical administration (PTB) for maintaining accordance with the international units system (SI).
  • This calibration is performed in accordance with DIN EN ISO/IEC 17025 and ISO 9001 standards.
  • The log-periodic antennas of the HyperLOG® 40xx series are suitable for interference field strength measurement. The specialized broadband characteristics allow measurements to be taken in the complete specified frequency range without switching.
  • These antennas are suitable for measurement according to the following standards and procedures:
    CISPR, VDE, MIL, VG, EN 55011, EN 55013, EN 55015, EN 55022, MIL-Std-461.

Highlights:
  • Only a single broadband antenna for the complete frequency range up to 6GHz
  • Optimal for usage with spectrum analysers for EMC measurement
  • Incl. high-tech radom with modern, appealing design
  • Freely alignable polarisation
  • Calibration data can be saved to an IC on the antenna and also be read back
  • Excellent forward/backward ratio
  • Excellent symmetry of radiation patterns
  • Integrated 1/4" tripod socket
  • Suitable for mobile use
  • Suitable for outdoor installation
  • Robust design
  • Splash water proof
  • Made in Germany
  • 10 years warranty

Specifications:
    HyperLOG 4025:
  • Design: Logarithmic-periodic
  • Frequency range: 400MHz-2,5GHz
  • Max. transmission power: 100W CW (400 MHz)
  • Nominal impedance: 50 Ohms
  • VSWR (typ.): <1:2
  • Gain (typ.): 4dBi
  • Antenna factor: 18-34dB/m
  • Return loss: Better than -10dB
  • Calibration points: 211 (10MHz steps)
  • RF connection: SMA socket (18GHz) or N socket using an adapter
  • Polarisation: linear vertical/horizontal
  • Tripod connection: 1/4"
  • Dimensions (L/W/D): (590x360x30) mm
  • Weight: 1200gr
  • Warranty: 10 years

    Gain diagram in dBi
    Zoom image

    Antenna factor in dB(m-1)
    Zoom iamge

    Specifications subject to change without notice

    HyperLOG 4040:
  • Design: Logarithmic-periodic
  • Frequency range: 400MHz-4GHz
  • Max. transmission power: 100W CW (400 MHz)
  • Nominal impedance: 50 Ohms
  • VSWR (typ.): <1:2
  • Gain (typ.): 4dBi
  • Antenna factor: 18-38dB/m
  • Return loss: Better than -10dB
  • Calibration points: 361 (10MHz steps)
  • RF connection: SMA socket (18GHz) or N socket using an adapter
  • Polarisation: linear vertical/horizontal
  • Tripod connection: 1/4"
  • Dimensions (L/W/D): (590x360x30) mm
  • Weight: 1200gr
  • Warranty: 10 years

    Gain diagram in dBi
    Zoom image

    Antenna factor in dB(m-1)
    Zoom image

    HyperLOG 4060:
  • Design: Logarithmic-periodic
  • Frequency range: 400MHz-6GHz
  • Max. transmission power: 100W CW (400 MHz)
  • Nominal impedance: 50 Ohms
  • VSWR (typ.): <1:2
  • Gain (typ.): 5dBi
  • Antenna factor: 20-40dB/m
  • Return loss: Better than -10dB
  • Calibration points: 561 (10MHz steps)
  • RF connection: SMA socket (18GHz) or N socket using an adapter
  • Polarisation: linear vertical/horizontal
  • Tripod connection: 1/4"
  • Dimensions (L/W/D): (590x360x30) mm
  • Weight: 1000gr
  • Warranty: 10 years

    Gain diagram in dBi
    Zoom image

    Antenna factor in dB(m-1)
    Zoom image

Included with delivery:
  • HyperLOG 40xx antenna
  • Typical calibration data with up to 561 calibration points (10MHz steps!)
  • Aluminum design carrycase with custom padding
  • Sturdy, detachable handle with "miniature tripod" mode
  • Special Aaronia SMA toolset with over-torque protection

Description:
HyperLOG 6000 with multi-functional handle
Ultimate functionality and elegant design at a revolutionary price: The HyperLOG® 4000 series in velvet blue

Transparent version
Optional multi-functional aluminum tripod. For optimal measurement results and stability

Multi-functional handle in tripod mode
Also available with beautiful "transparent" finish (hand-polished) at an extra charge

Dream team: Spectrmu analyser and HyperLOG antenna
The Dream team for EMC measurement in the laboratory or in harsh outdoor environments: spectrum analyser and HyperLOG® directional antenna.

Most of the professional broadband antennas available on the market today just have one disadvantage: They are extremely expensive.
In contrast, Aaronia offers a very cost-effective alternative with their HyperLOG® 4000 series, still meeting even the highest expectations. They offer an exceptional mix of performance, functionality and design formerly unknown in this price category. Together with the HyperLOG® antennas, any regular spectrum analyser instantly becomes a professional RF measurement device with directional characteristics. Hence, a true dream team for EMC measurement in the laboratory or for outdoor use.
The LogPer antennas of the HyperLOG® 4000 series are identical to those of the 7000 series, but have an enhanced frequency range down to 400MHz, particularly for covering the 70cm amateur radio band (430 MHz and up). Consequently, the dimensions of the antennas had to be increased significantly.

EMC antennas from Aaronia AG are totally different to the regular antennas available on the market:
Many commercially available antennas are based on PCBs and other unprofessional designs and do not really represent professional measurement technology. In addition to the simple technical construction, one more important omission is very common: these antennas come "naked", without Radom frame, as a raw PCB (particularly included with cheap broadband measurement devices). Due to this construction, mismeasurements and invisible damage caused by environmental influence (oxidation, fissures, etc.) can occur.

In contrast, HyperLOG® antennas come STANDARD with a specially constructed, high tech Radom housing. This housing has been constructed after intense research with the most modern computer technology in such a way that its shape, material and special coating have virtually no influence on measurements, not even in case of dew or other kinds of humidity collecting on the surface. Another important factor for Aaronia was the development of a Radom with the lowest possible damping factor achievable. This turned out to be quite an adventure for our development team, particularly in the high GHz ranges. Fortunately, this adventure has been mastered resulting in a beautiful, elegant design, to the complete satisfaction of the development team. Our first test measurements even by far surpassed our guidelines!
The resulting antenna had the best possible protection against mechanical stress and environmental influence without sacrificing any of its performance.
A further distinctive feature of the HyperLOG®'s Radom is the integrated 1/4" screw thread for accepting the included (directional measurent) handle. As it conforms to the standard due to its size of 1/4", the antenna could also be mounted to any other suitable tripod. Hence, polarisation and bearing of the antenna can be adjusted optimally and reliably.

Inside the Radom, you can find our sophisticated antenna itself, covered with a highly conductive GOLD COATING. This high-grade coating and the antenna's special design warrant excellent linearity over the entire frequency range, and an exceptional receiving or transmitting performance.
Each antenna is calibrated precisely in the Aaronia laboratories before dispatch. It is even possible to permanently store calibration data in a special IC on the antenna. These can later be recalled for dynamic antenna adjustment, for example, with an Aaronia spectrum analyser.

In conjunction with a spectrum analyser and a HyperLOG®, you have THE perfect team for EMC measurement at your disposal. It is THE innovative solution for your sophisticated measurement demands, while still taking care of your budget - for whereelse do you find antennas with comparable performance at a similar price ? In case you also decide on using spectrum analysers from Aaronia, you will save even more and be able to fully exploit all feature of our HyperLOG® antennas incl. automatic calibration.

Extensive accessories including multi-functional handle and aluminum case
Extensive accessories: Aluminum carrycase, multi-functional handle & SMA toolset
Included with delivery: A sturdy aluminum design carrycase with custom padding for the antenna, cables and accessories. Furthermore, every antenna of the HyperLOG® 4000 series includes a detachable multi-functional handle with "miniature-tripod" mode and an appropriate SMA toolset.


 Frequency ranges of HyperLOG® precision Measurement-Antenna and EMC Test-Antenna:
Antenna Type: 380MHz 400MHz 680MHz 700MHz 2,5GHz 4GHz 6GHz 8GHz 10GHz 18GHz Total Range: Application examples for resp. frequency range:
HyperLOG® 7025 700MHz-2,5GHz GSM900, GPS, DECT, GSM1800, UMTS, microwave ovens, WLan, WiFi
HyperLOG® 7040 700MHz-4GHz GSM900, GPS, DECT, GSM1800, UMTS, microwave ovens, WLan, WiFi, Radar, UWB (FB2-FB3)
HyperLOG® 7060 700MHz-6GHz GSM900, GPS, DECT, GSM1800, UMTS, microwave ovens, WLan, WiFi, Radar, 5,8GHz W-Lan, UWB (FB2-FB7)
HyperLOG® 6080 680MHz-8GHz GSM900, GPS, DECT, GSM1800, UMTS, microwave ovens, WLan, WiFi, Radar, 5,8GHz W-Lan, radio links, UWB (FB2-FB7)
HyperLOG® 60100 680MHz-10GHz GSM900, GPS, DECT, GSM1800, UMTS, microwave ovens, WLan, WiFi, Radar, 5-6GHz WLan, radio links, weather radar, UWB (FB2-FB8)
HyperLOG® 60180 680MHz-18GHz GSM900, GPS, DECT, GSM1800, UMTS, microwave ovens, WLan, WiFi, radar, 5-6GHz WLan, radio links, weather radar, misc. satellite services, UWB (FB2-FB10)
HyperLOG® 4025 400MHz-2,5GHz 70cm amateur radio, GSM900, GPS, DECT, GSM1800, UMTS, microwave ovens, WLan, WiFi
HyperLOG® 4040 400MHz-4GHz 70cm amateur radio, GSM900, GPS, DECT, GSM1800, UMTS, microwave ovens, WLan, WiFi, radar, UWB (FB2-FB4)
HyperLOG® 4060 400MHz-6GHz 70cm amateur radio, GSM900, GPS, DECT, GSM1800, UMTS, microwave ovens, WLan, WiFi, Radar, 5-6GHz WLan, UWB (FB2-FB7)
HyperLOG® 3080 380MHz-8GHz TETRA, 70cm amateur radio, GSM900, GPS, DECT, GSM1800, UMTS, microwave ovens, WLan, WiFi, Radar, 5-6GHz WLan, radio links, UWB (FB2-FB7)
HyperLOG® 30100 380MHz-10GHz TETRA, 70cm amateur radio, GSM900, GPS, DECT, GSM1800, UMTS, microwave ovens, WLan, WiFi, Radar, 5-6GHz WLan, radio links, weather radar, UWB (FB2-FB8)
HyperLOG® 30180 380MHz-18GHz TETRA, 70cm amateur radio, GSM900, GPS, DECT, GSM1800, UMTS, microwave ovens, WLan, WiFi, Radar, 5-6GHz WLan, radio links, weather radar, misc. satellite services, UWB (FB2-FB10)
Optional available with ISO CALIBRATION CERTIFICATE!
© Aaronia AG, DE-54597 Euscheid, Germany, www.spectran.com, Phone ++49(0)6556-93033

Aaronia AG, www.elektrosmog.de Aaronia USA, Exclusive North America Distributor - Kaltman Creations LLC
651 Amberton Crossing, Suwanee, Georgia 30024 USA
Tel. 678-714-2000, Fax 678-714-2092
Email:sales@kaltmancreationsllc.com URL:www.aaroniausa.com
Registered trademarks of Aaronia AG
are registered trademarks of Aaronia AG
Back to Aaronia HOMEPAGE