Active Differential Probe DC to 30MHz

Active Differential Probe ADP1
Visit the EMV 2009 in Stuttgart
CE tested

Technical Datas:
  • Bandwidth: DC-30MHz
  • Attenuation Ratio: 1:20 bzw. 1;200
  • Input Impedance: 4MOhm / 5,5pF
  • Rise Time: 14nS
  • Accuracy: +/-2%
  • Max. Input Voltage at 1:20: 140V Differential / 1400V (CAT III)
  • Max. Input Voltage at 1:200: 1400V Differential / 1400V (CAT III)
  • Noise: 0,7mV RMS
  • CMRR (typical): -80dB @50Hz, -60dB @20kHz
  • Input Connector: SMA (male)
  • Power requirements: 4xAA Cells or external 6-9V DC Mains Adaptor
  • Dimensions (L/W/H): (170x62x20) mm
  • Weight (incl. Cells, Cable and Grabber): 430gr
  • Warranty: 10 Years

Included with delivery:
  • ADP1 Differential Probe with SMA-Input
  • 2 x Grabber
  • Grounding-Kit
  • 4 x AA Cells
Frequency Overview Aaronia Antennas and Probes:
Frequency Overview Antennas and Probes
© Aaronia AG, DE-54597

ADSL Test with ADP1 Differential Probe
Direct measurement at a ADSL-Line with ADP1
Differential Probe and a SPECTRAN NF-50xx

Our special active Differential Probe ADP1 for the SPECTRAN NF-50xx series offers a potential free measurement and also expands the measurement range up to 240V.
With this probe the signal will not be influenced (potential free measurement). It also protects the SPECTRAN input against high voltages up to 1400V (CAT3).
Its a "must have" for direct cable-measurements on DSL, ADSL, free running oszillators, mains etc.
Included with delivery is a special grounding kit which protects the unit against static electricity (ESD). This is very important at long time measurements.
Power supply is possible with the internal cells (4 x AA) or, at long time measurements, with a optional mains adapter (option).

Aaronia AG, Aaronia USA, Exclusive North America Distributor - Kaltman Creations LLC
651 Amberton Crossing, Suwanee, Georgia 30024 USA
Tel. 678-714-2000, Fax 678-714-2092
Registered trademarks of Aaronia AG
are registered trademarks of Aaronia AG
Back to Aaronia HOMEPAGE