EMC & magnetic field screening Aaronia MagnoShield®

Mu-metal Screening

REFERENCES / examples of professional users:

  • German military (technical intelligence), Hof
  • Max-Planck Institute for nuclear physics, Heidelberg
  • Max-Planck Institute for quantum optics, Garching
  • Max-Planck Institute for plasma physics, Garching
  • LBBW Bank, Stuttgart
  • Technische Universitšt Hamburg
  • Landesbank Berlin, Berlin

Specifications:
    Aaronia MagnoShield® COMPOUND panels
  • NEALED for MAXIMUM screening efficiency
  • Screening factor: 5-7
  • Saturation flux density: approx. 0,8 Tesla
  • Packaging unit: 2m≤
  • Width: approx. 1000mm (1m)
  • Height: approx. 2000mm (2m)
  • Thickness: approx. 2mm
  • Electrically conductive material: Aluminum
  • Magnetically conductive Material: Nickel/iron alloy, so-called. Mu-Metal, isotrope
  • Noncorrosive
  • Frost proof
  • Paintable
  • Installable in plaster or concrete
  • Very easy handling even for the novice
  • Easy handling due to practical packaging unit
  • Colour: Silver (Aluminum)
  • Weight: approx. 8kg/m≤
  • Quality assurance standard: ISO 9001
  • Material verification certificate: B according to EN 10204
    Aaronia MagnoShield® DUR panel
  • NEALED for MAXIMUM screening efficiency
  • Screening factor: 10-13
  • Saturation flux density: approx. 0,8 Tesla
  • Packaging unit: 1,4m≤
  • Width: approx. 700mm (0,7m)
  • Height: approx. 2000mm (2m)
  • Thickness: 0,5mm (1mm with screening factor >15 on request)
  • Magnetically conductive Material: Nickel/iron alloy, so-called. Mu-Metal, isotrope
  • Noncorrosive
  • Frost proof
  • Paintable
  • Installable in plaster or concrete
  • Very easy handling even for the novice
  • Easy handling due to practical packaging unit
  • Colour: Dark silver
  • Weight: approx. 4kg/m≤
  • Quality assurance standard: ISO 9001
  • Material verification certificate: B according to EN 10204
Transmission damping curves:
Damping curve Aaronia MagnoShield
Damping curve Aaronia MagnoShield
Magnetic field above a transformer station without screening.
Magnetic field above the transformer station after screening.
Material characteristics:
Installation in an office building
Aaronia Magnoshield® made from Mu-metal allows quick and easy large-area magnetic field screenings. Also visible: magnetic field screening of cable duct.

Aaronia offers an extremely efficient, yet very easy to handle solution for screening static and alternating magnetic fields: Aaronia MagnoShield® magnetic field screening panels. Aaronia MagnoShield® magnetic field screening panels offer, thanks to their special Mu-metal / aluminum compound concept, protection against high-frequency (RF) AND low-frequency (LF) radiation and protection against low-frequency magnetic fields.
Aaronia MagnoShield® screening panels are easy to handle and install. They are robust, frost proof, rot proof, noncorrosive and can even be installed in plaster or concrete. Thus, they are also suitable for outdoor application.
Aaronia MagnoShield® screening panels have been especially developed for screening even strong magnetic fields caused by local radiation sources like cables, transformers, generators, traction power, power distribution boxes, high-voltage lines etc. They allow screening of entire rooms, houses and other buildings, but also highly sensitive areas like distributing centres, control centres etc. against interference from magnetic fields.
Installation is performed edge to edge to build a completely closed surface.

To screen SMALL AREAS (for example: electronic circuit boxes, PCs, monitors, small transformers etc.), we recommend our well-established, highly-flexible Aaronia MagnoShield® FLEX screening foil .

Screening a room:
Installation in an office building
Large-area screening of an office building against a lower level transformer station using Aaronia Magnoshield® screening panels.

To screen a room against a low-frequency magnetic field, such as caused by a transformer station, the surface facing the radiation source needs to be covered completely with Aaronia MagnoShield® screening panels. This is the only way to efficiently block the magnetic field (ATTENTION: If ADDITIONALLY a high-frequency radiation source like mobile communications needs to be screened against, the ENTIRE room must ADDITIONALLY be covered completely with Aaronia X-Dream® screening fleece. Windows need to be covered with the transparent screening fabric Aaronia-Shield®.).
In floor areas, Aaronia MagnoShield® panels can be installed invisibly under the carpet, or in new constructions, inside the floor pavement or concrete. In the case of even, sustainable walls, the panels can be mounted directly to the walls using screws or firing pins. Otherwise, a sustainable support structure needs to be created first. Installation on ceilings is performed in a similar way, though special care needs to be excerzised as these panels are pretty heavy.
Doors should be covered entirely with Aaronia MagnoShield®. With the door closed, a gap-free connection with the rest of the panels in the room needs to be established.
After installation, Aaronia MagnoShield® panels can be painted or covered with plaster. Hence, an invisble installation is not a problem.
Installation by our experienced staff of professionals:
On request, our professional and experienced staff can install Aaronia MagnoShield® on site. Further related work such as professional grounding of our panels can also be performed. Please contact us for further information. We will provide you with a custom quote immediately.
Aaronia AG, www.electrosmog.comAaronia USA, Exclusive North America Distributor - Kaltman Creations LLC
651 Amberton Crossing, Suwanee, Georgia 30024 USA
Tel. 678-714-2000, Fax 678-714-2092
Email:sales@kaltmancreationsllc.com URL:www.aaroniausa.com
Registered trademarks of Aaronia AG
are registered trademarks of Aaronia AG
Back to AaroniaUSA HOMEPAGE